|
|
Flag Poles Ordering and Flag Poles Installation
Information
|
 |
GENERAL INFORMATION
Our cone tapered ground set aluminum
flagpoles are precision fabricated from new,
6063-T6 tubing utilizing the industry’s most
sophisticated, state-of-the-art
manufacturing processes. The conical portion
tapers approximately 1” in every 51/2 feet.
Poles with overall lengths of less than
38’6” are shipped in one piece. Longer
lengths are shipped in sections and will be
factory fitted with a self-aligning sleeve
which requires no field welding. Upon proper
assembly a hair-line joint will occur.
All poles are double spiral wrapped with
protective paper and shipped in a hard fiber
tube. “Warning” - The flagpole shaft will
stain if allowed to remain in contact with
wet or damp wrappings. If there is any sign
that the shaft or its shipping tube has come
in contact with water during shipment,
remove it from the tube and unwrap
immediately. If the shaft is to be stored
outdoors, it must be stored unwrapped, and
off the ground. If the shaft is to be stored
indoors, it may be left in the wrappings and
the tube, provided that it shows no sign of
having been exposed to moisture, and that it
will not be exposed to moisture during
storage.
All foundation dimensions listed in this
catalog are intended for general guidelines
only in good, firm, dry soil. It is
recommended to consult and engineer for
specific foundation dimensions suited to
your exact location. “Warning” - Extreme
care must be exercised when installing
flagpoles near overhead power lines or when
digging in the vicinity of buried cable or
piping. Contact your local authorities
before any digging.
STANDARD FINISHES
All flagpole shafts are highly polished
with fine grain aluminum oxide cloth
resulting in a high quality, deep satin
lustre finish. This finish represents the
ultimate in architectural finishes for
aluminum flagpoles. The elegant, soft sheen
remains maintenance free. In addition to
satin, the following anodized finishes are
available as standard colors: clear, light
bronze #311, medium bronze #312, dark bronze
#313 & black #335. Note: of the three bronze
finishes, dark bronze #313 is supplied
unless otherwise specified.
|
|
